The SW-D-FS-EX Weigh Cell series covers a weighing range up to 2,000 g. They have been specifically designed as a compact sensor component and are especially suited for installation in multilane applications or anywhere that small sizes are in demand.

Due to the special design, the Weigh Cells are also suited for use in areas at risk of explosion.

They comply with the type of protection II 3 G Ex nA IIB T4 and II 3 D Ex tD IP54 100 °C and can be used in zone 2 (gas) and zone 22 in environments with non-conductive dust.

The docking station enables easy replacement of the Weigh Cell for cleaning or servicing purposes. System-induced active self-damping guarantees the shortest possible measuring times while maintaining the highest resolution.

As a ready-for-connection installation component, the Weigh Cell already supplies final weight values via a CAN interface as a standard feature. The integrated software filters can be configured in many ways and thus allow optimal adaptation of the weighing system to the relevant local conditions. The Weigh Cells extensive command set enables easy control engineering integration. Supplemented with a large number of options, the Weigh Cells can also meet very specific requirements.

The EC-FS Weigh Cell series covers a weighing range up to 15,000 g. They have been specifically designed as a compact sensor component and are especially suited for installation in checkweighers, price labellers as well as lift-up systems, filling and packaging machines, parcel and mail sorting systems. The Weigh Cells large additive dead load range favors the installation of large conveyor belts or weighing platforms without limiting the weighing range.

As a ready-for-connection installation component, the Weigh Cell supplies final weight values via a CAN interface as a standard feature. The integrated software filters can be configured in many ways and thus allow optimal adaptation of the weighing system to the relevant local conditions. The Weigh Cells extensive command set enables easy control engineering integration. Supplemented with a large number of options, the Weigh Cells can also meet very specific requirements.

The SL-M-FS Weigh Cell series covers a weighing range up to 1,000 g. Thanks to a wide variety of different interfaces the Weigh Cells can communicate with all control systems on the market.

From a weighing perspective, the electronics are installed in a separate housing. This prevents a build-up of heat which is particularly detrimental to fast, high-precision weighing, particularly in multilane applications. It also means that there is no need for complex cooling.

As an alternative to the electronic box, the Weigh Cell can also be operated on MMS2 system components (MMS2 = Modular Multilane System). These components are designed in protection class IP65 and there is no need for an additional control cabinet. AVC (Active Vibration Compensation) can also be used in combination with MMS2.

The Wash Down option is now also available for the aluminum version of the Weigh Cell. This provides convenient connection of a common hygienic cover, particularly in the case of multilane applications.

In the load output area, the patented design enables easy assembly/disassembly with guaranteed tightness.

All versions now also include the Self Check option. An internal test weight can be used at any time to check that the Weigh Cell is working properly, e.g. during a batch change under clean room conditions.

The Weigh Cells are available in different versions for a wide range of requirements:

Stainless steel versions:

■ With Wash Down and Self Check option

■ The installation height is 112 mm

Aluminium versions:

■ With Wash Down and Self Check option

■ With clamping ring for (secondary) hood installation

■ The installation height is 112 mm

Aluminium version:

■ With Self Check option

■ The installation height is 91 mm

The SX-M-FS Weigh Cell series covers a weighing range up to 60 g. Thanks to a wide variety of different interfaces the Weigh Cells can communicate with all control systems on the market.

From a weighing perspective, the electronics are installed in a separate housing. This prevents a build-up of heat which is particularly detrimental to fast, high-precision weighing, particularly in multilane applications. It also means that there is no need for complex cooling. As an alternative to the electronic box, the Weigh Cell can also be operated on MMS 2 system components (MMS 2 = Modular Multilane System). These components are designed in protection class IP65 and there is no need for an additional control cabinet.control cabinet. AVC (Active Vibration Compensation) can also be used in combination with MMS 2.

The Weigh Cell provides a convenient hygiene-compliant enclosure option particularly for multilane applications. In the load output area, the patented design allows easy assembly/disassembly with guaranteed tightness. The Weigh Cells are available in different versions for a wide range of requirements:

Load output top:

■ With clamping ring for (secondary) hood installation

■ The installation height is 89 mm

Load output front:

■ With clamping ring for (secondary) hood installation

■ The installation height is 84 mm

The SW-M-FS Weigh Cell series covers a weighing range up to 2,000 g. Thanks to a wide variety of different interfaces the Weigh Cells can communicate with all control systems on the market.

From a weighing perspective, the electronics are installed in a separate housing. This prevents a build-up of heat which is particularly detrimental to fast, high-precision weighing, particularly in multilane applications. It also means that there is no need for complex cooling.

As an alternative to the electronic box, the Weigh Cell can also be operated on MMS 2 system components (MMS 2 = Modular Multilane System). These components are designed in protection class IP65 and there is no need for an additional control cabinet.

AVC (Active Vibration Compensation) can also be used in combination with MMS 2.

The Weigh Cell now also includes the Self Check option. An internal test weight can be used at any time to check that the Weigh Cell is working properly,

e.g. during a batch change under clean room conditions. The Weigh Cells are available in different versions for a wide range of requirements:

Stainless steel version:

■ With Wash Down and Self Check option

■ The installation height is 112 mm

The SW-FS Weigh Cell series covers a weighing range up to 2,000 g. They have been specifically designed as a compact sensor component and are especially suited for installation in multilane applications or anywhere that small sizes are in demand. Due to the GMP-compliant design, the Weigh Cells are also suited for use in the pharmaceutical industry.

As a ready-for-connection installation component, the Weigh Cell already supplies final weight values via a CAN interface as a standard feature. The integrated software filters can be configured in many ways and thus allow optimal adaptation of the weighing system to the relevant local conditions.

The Weigh Cells extensive command set enables easy control engineering integration. Supplemented with a large number of options, the Weigh Cells can also meet very specific requirements.